How to price a furnace ignitor replacement: flat-rate example
Free from Relay, no signup. Defaults and sources checked November 9, 2026.
A flat-rate furnace ignitor price is the labor and the ignitor at your margin: labor hours × (labor cost + overhead per billable hour), plus what the ignitor costs you, divided by one minus your target margin. Relay's starter assumption is 0.75 hours of one technician's time. With $106 an hour of labor and overhead, a $49.90 ignitor and a 20% net margin, the replacement is $162. The no-heat diagnostic is a separate line, and a flame sensor is an add-on the technician can put on the same ticket.
Time on site, plus drive time if you don't charge it separately.
Wage plus payroll taxes and benefits, divided by the share of paid hours you bill. Work out yours.
Yearly overhead, including trucks if your labor cost leaves them out, divided by the hours your technicians bill.
Profit as a share of the price, after labor, overhead and materials.
Flat-rate price
$162
$32 profit, a 25% markup on cost. Works out to $216 per labor hour.
| Labor | $50 |
|---|---|
| Overhead | $30 |
| Parts and materials | $50 |
| Total cost | $129 |
| Price at a 10% margin | $144 |
|---|---|
| Price at a 20% margin | $162 |
| Price at a 30% margin | $185 |
| Price at a 40% margin | $216 |
| Price at a 50% margin | $259 |
Prices before tax. Rounded to whole dollars; 0.75 labor hours.
What the job includes and how long it takes
In Relay's starter pricebook, the replacement covers swapping the furnace ignitor and verifying safe, reliable burner ignition. It assumes 0.75 hours of one technician's time and one ignitor as the only part. Treat the hours as a starting point and replace them with your own job times.
Keep the diagnosis out of this price. Whether you charge a service call fee or price a no-heat diagnostic as its own service (1 hour in Relay's starter pricebook), the ignitor line then costs the same on a no-heat call and on a heating tune-up.
OEM or universal: what the ignitor costs you
Hot surface ignitors are matched to the furnace, so the part you stock decides the cost. Four public listings on November 5, 2026:
| Seller | Part | Price |
|---|---|---|
| Jackson Systems | White-Rodgers 768A-845 silicon nitride ignitor, replacement for Trane | $36.99 |
| US Supply | Rheem 62-22868-93 silicon carbide ignitor, for Rheem and Ruud furnaces | $49.90 |
| Midwest Supply | White-Rodgers 768A-845 silicon nitride ignitor | $54.07 web price ($93.26 list) |
| US Supply | Honeywell Q3200U1004/U universal silicon carbide igniter kit | $62.68 |
The calculator starts at $49.90. The universal igniter costs more, but its listing describes the Q3200U series as engineered to replace most silicon carbide igniters, so one part on the truck covers many furnaces. Stocking it instead raises your cost by $12.78 and the price by $16 at a 20% margin. Compare that with what a return trip for a brand-specific part costs you.
Flame sensors, pressure switches and other add-ons
Give each add-on its own line so the technician can add it to the ticket without changing the ignitor price. Relay's starter assumptions:
- Flame sensor: 0.5 hours on its own. A Rheem 62-23543-01 lists at $8.89 at US Supply. When it's replaced on the same visit as the ignitor, the burner is already open, so you may want a separate add-on line with less time.
- Pressure switch: 0.75 hours, $99 of labor at the calculator defaults, plus the switch the furnace takes at your cost.
Worked example
A no-heat call where the technician replaces the ignitor, using the calculator defaults ($66 labor cost and $40 overhead per billable hour, a 20% net margin), Relay's starter labor hours and the US Supply part prices above.
| Line | Labor hours | Part | Your cost | Price |
|---|---|---|---|---|
| No-heat diagnostic | 1 | None | $106.00 | $133 |
| Replace furnace ignitor | 0.75 | $49.90 | $129.40 | $162 |
| Ticket total | 1.75 | $49.90 | $235.40 | $294 |
| Add-on: replace flame sensor | 0.5 | $8.89 | $61.89 | $77 |
If you charge a flat service call fee instead of pricing the diagnostic, put your fee on the first line. Change the labor cost, overhead or margin in the calculator and the same hours and parts give your prices.
Ignitor pricing in Relay
Relay comes with starter HVAC services for the no-heat diagnostic and for furnace ignitor, flame sensor and pressure switch replacement, each with labor hours and the part filled in for you to review and price. A service's price can be entered by hand or calculated from its labor and materials, and each service shows its expected cost and margin. When you change a price, estimates and invoices you've already sent keep theirs. Relay is $99 a month for 1–2 technicians or $199 for 3–9.
Questions
How do I price flame sensor cleaning?
Relay's starter pricebook prices flame sensor replacement, not cleaning: 0.5 hours and an $8.89 part, or $77 at the calculator defaults. If your technicians clean sensors instead, price the cleaning as its own line from the time it takes, so it doesn't hide inside a diagnostic or tune-up.
Should the ignitor price change with the furnace brand?
The four ignitors above range from $36.99 to $62.68, a $32 difference in price at a 20% margin. If the ignitors you stock cost about the same, one price keeps the pricebook shorter. If they don't, use a line per ignitor type, each priced from its own part cost.
What warranty should an ignitor replacement carry?
Relay's starter pricebook gives the ignitor part a typical 12-month warranty, which you can change. A labor warranty is your decision. If you offer one, the cost of callbacks under it belongs in your margin.