Relay
Pricing
Get started
Pricing
Get started
Free tools

How to price a water heater replacement: flat-rate example

Free from Relay, no signup. Defaults and sources checked November 9, 2026.

A flat-rate water heater replacement price is the swap labor plus the heater and install parts at your margin: labor hours × (labor cost + overhead per billable hour), plus parts, divided by one minus your target margin. Relay's starter assumption is 4 hours to replace a standard tank. Price the expansion tank, permit, haul-away and any venting or gas work as separate lines, so the base price doesn't have to cover every house. The calculator starts with 4 hours and $962.53 of parts: a 40-gallon gas heater and its connectors at one supply house's list prices.

hours

Time on site, plus drive time if you don't charge it separately.

$

Wage plus payroll taxes and benefits, divided by the share of paid hours you bill. Work out yours.

$

Yearly overhead, including trucks if your labor cost leaves them out, divided by the hours your technicians bill.

$
%

Profit as a share of the price, after labor, overhead and materials.

Flat-rate price

$1,733

$347 profit, a 25% markup on cost. Works out to $433 per labor hour.

Cost breakdown
Labor$264
Overhead$160
Parts and materials$963
Total cost$1,387
Price at other margins
Price at a 10% margin$1,541
Price at a 20% margin$1,733
Price at a 30% margin$1,981
Price at a 40% margin$2,311
Price at a 50% margin$2,773

Prices before tax. Rounded to whole dollars; 4 labor hours.

What the job includes and how long it takes

In Relay's starter pricebook, the replacement covers removing the existing standard tank, installing the replacement and checking that it operates safely. It assumes 4 hours of labor and no parts: the heater and everything that depends on the site are separate lines. Treat the hours as a starting point and replace them with your own job times. If your gas swaps take longer than your electric ones, give each its own labor line.

What the heater and parts cost you

List prices at US Supply on November 5, 2026:

List prices before tax, read November 5, 2026. US Supply shows account pricing after sign-in.
PartListingPrice
40-gallon gas heaterRheem PROG40-40N-RH62, 40,000 BTU, atmospheric vent, 6-year limited tank and parts warranty$883.12
50-gallon electric heaterRheem PROE50-T2-RH95, two 4,500 W elements, 6-year limited tank and parts warranty$743.31
Water connector, 3/4" × 18"Sioux Chief 633X18PK copper, PEX crimp × FIP swivel (for PEX supply lines), one each for hot and cold$29.12 each
Gas connector, 1/2" × 18"Everflow FTGC-YC12-18A$21.17
Thermal expansion tankZilmet ZEP5, 2.1 gallons, rated for potable water$42.37

The heater is most of the cost, so its margin moves the price more than anything else on the ticket: at a 20% margin, every $100 of heater cost adds $125 to the price.

Expansion tanks, permits, haul-away and venting

  • Expansion tank: where a check valve or backflow preventer on the cold supply traps the expanding water, or thermal expansion pushes the pressure above a pressure-reducing valve's setting, the International Residential Code requires a device to control that pressure (section P2903.4). North Carolina's Office of State Fire Marshal has interpreted the state plumbing code (2018 edition, section 607.3) to require an expansion device on water heater replacements too. Rheem's technical bulletin explains why: in a closed system the heated water has nowhere to go, repeated pressure spikes shorten tank life, and an expansion tank absorbs the extra volume. On a replacement, price the tank ($42.37 at US Supply) plus any time it adds. On its own, Relay's starter assumption is 1.5 hours.
  • Permit: if your jurisdiction requires one for a water heater replacement, add a line for the fee plus the time it takes to pull and close the permit.
  • Haul-away: price removal and disposal of the old tank at what disposal costs you, so a customer who keeps the old heater doesn't pay for it.
  • Venting, gas piping and code corrections: price separately when the new heater needs vent changes, gas piping changes, a drain pan, seismic straps or other work to meet your local code. These vary by house, which is why they don't belong in the base price.

Worked example

The same swap with a gas and an electric heater, using the calculator defaults ($66 labor cost and $40 overhead per billable hour, a 20% net margin), Relay's starter labor hours and the US Supply prices above.

Price is cost ÷ 0.8, rounded to whole dollars.
Line40-gallon gas50-gallon electric
Replacement labor, 4 hours × $106$424.00$424.00
Water heater$883.12$743.31
Connectors$79.41 (two water, one gas)$58.24 (two water)
Your cost$1,386.53$1,225.55
Price at a 20% margin$1,733$1,532
Add-on: expansion tank, part only$53$53

Permit, haul-away and any venting or gas work go on top at your own costs.

Water heater pricing in Relay

Relay comes with starter plumbing services for standard tank replacement and thermal expansion tank replacement, with labor hours filled in, and gas and electric tank water heaters, the expansion tank, haul-away and a permit fee as separate items, for you to review and price. A service's price can be entered by hand or calculated from its labor and materials, and each service shows its expected cost and margin. When you change a price, estimates and invoices you've already sent keep theirs. Relay is $99 a month for 1–2 technicians or $199 for 3–9.

Questions

Should the water heater carry the same margin as the labor?

This method applies one margin to the whole job. A lower margin on equipment lowers the price quickly because the heater is most of the cost: pricing the $883.12 gas heater at a 10% margin instead of 20% takes $123 off the price. If you do that, check that the labor line still covers your overhead and profit.

How do I price tankless or larger tank installs?

As their own services. Relay's starter assumption of 4 hours is for a standard tank swap. A tankless conversion or a larger tank can need gas, venting or electrical changes that a standard swap doesn't, so give it its own labor line and parts.

Should the price include a labor warranty?

Both heaters in the example carry a 6-year limited tank and parts warranty from the manufacturer. A labor warranty is your decision. If you offer one, the cost of callbacks under it belongs in your margin.

Plumbing pricebook software guide
Book a demo

All free tools

Product

  • All features
  • AI Front Office
  • Business Phone
  • Website
  • Booking
  • Pipelines
  • Scheduling & dispatch
  • Mobile App
  • Pricebook
  • Inventory
  • Time tracking & timesheets
  • Estimates & proposals
  • Invoicing & payments
  • Customer management
  • Maintenance plans
  • Review requests
  • Customer campaigns
  • Reports & profitability

Compare

  • Relay vs Housecall Pro
  • Relay vs Jobber
  • Relay vs ServiceTitan
  • Relay vs Workiz
  • Relay vs FieldPulse

Industries

  • HVAC
  • Plumbing
  • Electrical
  • Garage door
  • Appliance repair

Legal

  • Privacy
  • Terms
  • SMS Policy
  • Account Deletion

Company

  • About
  • Guides
  • Free tools
  • Help center
  • Contact
  • Support
© 2026 Relay Ops, Inc.