Pipe velocity calculator from flow and inside diameter
Free from Relay, no signup. Defaults and sources checked November 13, 2026.
Use a known volume flow and the actual inside diameter of a full round pipe. The result is average velocity across the waterway, not the fastest point in the flow.
Method
Average velocity = volume flow ÷ internal cross-sectional area. Round area = π × inside diameter² ÷ 4. Convert US gallons/min to m³/s with 0.003785411784 ÷ 60, or liters/s to m³/s with 0.001. Divide m/s by 0.3048 for ft/s.
Worked example
10 US gpm through a true 1.000-inch internal diameter produces approximately 4.085 ft/s, or 1.245 m/s. Doubling the inside diameter at the same flow makes area four times as large, so average velocity falls to one quarter.
What this calculation covers
Full-pipe average-velocity arithmetic only. Does not calculate pressure loss, water hammer, noise, erosion, allowable velocity or pipe size. Not valid for partially filled drains or compressible-flow design. Verify actual inside diameter and fluid flow at the section being assessed.
Method references
Continue your work
Questions
Can I share the calculation with a customer?
Yes. Calculate, open Prepare a report, optionally add a customer or project name, and download a PDF with your inputs, method, references and limitations. Inputs stay in your browser.